Seahorse running fine...and then, not...repeat!

jamesriveralumacraft

Recruit
Thread starter
Joined
Jul 23, 2017
Messages
2
​Yesterday, the motor( 10 HP Seahorse, 1956) purred like a kitten for the first 15 minutes of use. Then, she seemed to get bogged down. She would still run, but sounded warbly...I would describe it like a hesitation. When I cut off the motor, and my boys played in some sand, it was very tough to get it going again...maybe 10 or more pulls. Usually, it takes 2. I was running fresh gas/right mixture. I tilted the motor and looked inside just to see if I saw any leaks or anything when on shore. Eventually, when I dropped the motor back in, I saw, it seemed, a lot of oil in the water. After I got it going, many pulls... it did the same thing. It purred for about 10 minutes, then started to hesitate...a little but still pushed me down the river. I messed with lean/rich mixture on both slow and fast. That helped a little, but not much. Eventually, we stopped again. This time for a rope swing. When I went to start it, it started second pull, but I had sheared a pin, which I never noticed, approaching shore. So, in the end, I had 2 issues. Any idea on the hesitation or it running rough? About 2 weeks ago, it did this same thing for the first time. I was running wide open, everything was great, and then, the motor just sounded super rich and loud. I also saw a little smoke coming from a hole at the top of the prop, where the water seems to come out when it runs. I looked in the parts manual for a good visual, but couldn't find the area I am talking abot

Thanks for any help! I was thinking maybe it was something with my tank's air supply to the motor. I thought about trying out a different tank just to see. Right now, I am running a vintage 1950s gas tank with the 10HP Johnson Seahorse.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The motor pumps air pressure to the tank to keep the fuel flowing.----Have you replaced the impeller ?----Have you done a complete ignition tune-up ?
 

jamesriveralumacraft

Recruit
Thread starter
Joined
Jul 23, 2017
Messages
2
I am pretty certain it was pumping water. Good God! If it wasnt, I hope I didn't mess up my motor. I wonder how long it takes to really make it hurt. Would that all contribute to a sheared pin? I've sheared one before, but I really didn't think I hit anything. I had to look up what an impeller is. That is why I am not a Supreme Mariner yet ...and a Cadet, I guess. Well, is that an easy thing I can examine and wrench on, or better to stay away from youtube videos and take it to someone? I have no idea if 1956 impellers for a Johnson Seahorse motor are easy/hard to get or install? Man, I will pass this along to all rookie boat owners I meet. "Learn from me...Let me tell you about the impeller...if it breaks...your motor might be toast."
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The impeller is an " in stock " item at many shops.------Easy to change.-----And yes many folks learn about impellers the hard way and that is an empty wallet.
 
Top