Thomas Zadrozny
Recruit
Thread starter- Joined
- Aug 8, 2011
- Messages
- 1
Cmon guys.
I checked everywhere and am unable to locate one of these parts. According to Swivel Eze / Attwood, these bumper/isolators were included in mounting kit part number 58000 and the part number of the bumper was P086. I have checked with a couple of fabicators and they want $600 just to set up the mold. This is a lot of money to spend on a piece of rubber. Please someone let me know if they have any clues on where I can obtain one of these.
I am in need of a replacement rubber bumper/isolator for a swivel eze trolling motor bracket that is used on a Motor Guide Trolling Motor. This was used as a factory install on a 2003 Sea Ray 185 fish & ski. I am told that Swivel Eze no longer produces this part and it is not available. Mine is torn and needs to be replaced. I will attach photos to show what I am looking for. The square rubber parts on the bow of the boat are what I need. The other photos show the bracket and how it attaches. Any help would be greatly appreciated.
I am in need of a replacement rubber bumper/isolator for a swivel eze trolling motor bracket that is used on a Motor Guide Trolling Motor. This was used as a factory install on a 2003 Sea Ray 185 fish & ski. I am told that Swivel Eze no longer produces this part and it is not available. Mine is torn and needs to be replaced. I will attach photos to show what I am looking for. The square rubber parts on the bow of the boat are what I need. The other photos show the bracket and how it attaches. Any help would be greatly appreciated.
Attachments
Last edited: