Sea Ray 210 SLX accessory panel not working

doug w

Cadet
Thread starter
Joined
Jun 30, 2018
Messages
6
my 2014 Sea Ray 210 SLX accessory panel ( bilge, horn, lights, blower) is not working. It was fine last year when I winterized and disconnected batteries. Circuit breaker, which is a push type, back by terminal posts does not seem to stay in also.

Any thoughts or suggestions as I have not begun testing

Thanks

Doug W
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
53,415
if the circuit breaker wont stay in, either you have the battery cables backwards, you have a short somewhere, or the circuit breaker is bad..... im leaning that you have the battery cables backwards

you did also clean the connections, correct?
 

doug w

Cadet
Thread starter
Joined
Jun 30, 2018
Messages
6
Scott - checked terminals and circuit breaker again by the 2 terminal junction posts. I found underneath circuit breaker red button was a lever that actually resets breaker. Pushed in in and everything works. Thanks for the reply as it lead me to recheck everything and eventually found problem
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
No -- you didn't find the problem. You found the result of the problem -- that is a popped circuit breaker. Resetting the breaker didn't fix the problem. You need to determine what caused the breaker to trip in the first place.
 
Top