Re: sea pro 2002 17cc fish finder?
DONE!
Thanks for the help. In principal, it is a simple job. In practice.....
It was tough getting it through that pvc chase, since it's loaded with other wires, including the steering cable (which doesn't budge). Took about three hours. I reinserted the old screws for the old transom mounted transducer once I removed it, covering them with 3M 4200 before screwing them back in. I was told that this is good way to seal the holes, better than taking them out and filling the hole with 3200. I hope it stays dry!
Anyway, tomorrow I'll find out if it works!!
thanks again for the help!