rod cap torque

03ironhead

Recruit
Thread starter
Joined
Mar 8, 2004
Messages
3
putting engine together do you need to use rod cap alignment tool to torque rod cap bolts.<br />1996 johnson 115 fast strike
 

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: rod cap torque

No rod cap alignment tool. The rod caps are not interchangeable and can not be turned.<br /><br />c/6<br />Hooty
 

rodbolt

Supreme Mariner
Joined
Sep 1, 2003
Messages
20,066
Re: rod cap torque

hello<br /> while the cap alignment tool is not positivly nessasry I use one cause its easier and faster. its also about 300 bucks. for a DIY'er the old method of using a pick and patience will still work. and hooty is 100% right. the caps are not interchangeable and if you tighten the bolts up and the caps are not aligned you will damage the cap/rod assy.<br /> good luck and keep posting
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: rod cap torque

We found some cases where the tool wouldnt line up the cap as good as you can by hand. Rare but it can happen.
 

R.Johnson

Rear Admiral
Joined
Sep 24, 2003
Messages
4,446
Re: rod cap torque

I have had case's as Dhadley discribes using the alignment tool. I like to use a sharp lead pencil across the cap part line, checking as I torgue the cap from side to side. If you look at the face of the cap, and rod you will see that it is not a machined part line, but rather a break. Thats why you can't turn the cap around. I would really like to watch how OMC does this. I would guess that Joe Reeves, or Dhadley has seen this done.
 

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: rod cap torque

The socket is a 12 point 5/16".<br /><br />c/6<br />Hooty
 

03ironhead

Recruit
Thread starter
Joined
Mar 8, 2004
Messages
3
Re: rod cap torque

thanks for the info nice to find people willing to help.first time working on outboard.helping a friend out
 
Top