Rochester 4MW Quadrajet float level

[Juhl]

Hi
Just rebuilding a Rochester 4MW Quadrajet caburator for my VP 205a.
With the rebuilding kit came an adjustment data table - but the values for my carb. was not in - and I want to check the float level - do any of you have the correct setting for it ?
The caburator no is 17088142 / 0169 ( stamped into the housing)
/Jens

 

[captmello]

http://boatinfo.no/lib/library.html

If you don't have the OEM manual, they are available in the link above. It describes the check you're looking for.

 

[Juhl]

Hi Captmello

Thanks - got the info I need from your link - surprised that the rebuild kit did not have the info for this carb no - but for many others.
/Jens

 

[Bluefin Savage]

Hi
Just rebuilding a Rochester 4MW Quadrajet caburator for my VP 205a.
With the rebuilding kit came an adjustment data table - but the values for my carb. was not in - and I want to check the float level - do any of you have the correct setting for it ?
The caburator no is 17088142 / 0169 ( stamped into the housing)
/Jens

Hi mate, I have the same carby and also can't find any info on the float settings. The link that you used back then, does not work now. Do you happen to remember the settings for the float. I know your post was from 2015 but is the only info I could find. Thanks, John