Restoring 85hp evinrude

Denny8112011

Recruit
Thread starter
Joined
Jul 11, 2017
Messages
2
I'm new to the boating world and not quite sure where to start with a boat that was given to us when we bought our house.

The boat has been sitting for a few years and needs lots of cosmetic work, new transom, new floor, etc. Those things are minimal to me.
The engine is my concern. It I has an 85hp Evinrude outboard motor 89953e. Looks to be in decent shape considering circumstances.

So my question is where do I start with the motor? Is there a rebuild kit I can buy, or do I just have to go part by part?

I've always done my own mechanic work, so I'm up for the challenge. Some direction from you boaters that are more experienced than I would be appreciated. Thanks!
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
Compression test first, if OK then full carb,fuel pump and all fuel related lines repaired/replaced. Then all cooling part as t-stats and impeller.....
 
Top