willows.2@hotmail.com
Seaman Apprentice
- Joined
- Jun 4, 2018
- Messages
- 34
Hello all.
Hope someone can steer me in the right direction here.
Im attempting to determine if my Stator and Timing Base are good or bad.
First of all i have no spark, and have removed both from the motor for inspection.
I have a basic understanding of how Multimeters work, and im trying to determine if the readings i have are in or out of spec.
Not sure what the correct specs are for my Johnson 09/2000 3cyl 2stroke, because the readings i searched on the net seem to differ quite a bit.
Both the Stator and Timer Base are probably original. The number on the Stator is 584560 and 14IZMX(i think) below it. The Timer Base is 584804 and 10IZMX(i think) below it. Motor Mod No J60VLSID .......09/2000.
I assume it is a Quick Start Model.......but not sure. When it was running it would run fast idle for a few secs when started, and then drop down.
The resistance readings are:
Stator wires :Yellow to Yellow = 1.4..........Orange to Orange/brown=413 with range set to 2000..........Brown to Brown/yellow=320 with range set to 2000K(only setting that would give a reading).
Timer Base wires have NO resistance readings at all between any wires on any range.......probably cactus i guess.
If someone could fwd the resistance specs and any other advice, to me i would appreciate very much.
Thanks all.
Hope someone can steer me in the right direction here.
Im attempting to determine if my Stator and Timing Base are good or bad.
First of all i have no spark, and have removed both from the motor for inspection.
I have a basic understanding of how Multimeters work, and im trying to determine if the readings i have are in or out of spec.
Not sure what the correct specs are for my Johnson 09/2000 3cyl 2stroke, because the readings i searched on the net seem to differ quite a bit.
Both the Stator and Timer Base are probably original. The number on the Stator is 584560 and 14IZMX(i think) below it. The Timer Base is 584804 and 10IZMX(i think) below it. Motor Mod No J60VLSID .......09/2000.
I assume it is a Quick Start Model.......but not sure. When it was running it would run fast idle for a few secs when started, and then drop down.
The resistance readings are:
Stator wires :Yellow to Yellow = 1.4..........Orange to Orange/brown=413 with range set to 2000..........Brown to Brown/yellow=320 with range set to 2000K(only setting that would give a reading).
Timer Base wires have NO resistance readings at all between any wires on any range.......probably cactus i guess.
If someone could fwd the resistance specs and any other advice, to me i would appreciate very much.
Thanks all.