replacing Thermo/Temp choke sensor on 1972 125 hp.

0sprey

Cadet
Thread starter
Joined
Jun 22, 2014
Messages
7
I need to replace the Thermo./Temp sensor for the choke. It seems to be installed with an adhesive, Anyone ever replace one of these? Mine appears to be damaged inside. Waiting for a new one to arrive. I have seen the service bulletin on how to change the wiring, but can't seem to find info on replacing the sensor itself
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
That was an early attemp to make motors easier to start for newbies.----------Most of those have been eliminated / bypassed .------I would never install a new sensor.-----The service bulletin explains how to bypass this switch.---It is then up to the operator to learn how to operate the choke function.--------Sorry.
 

0sprey

Cadet
Thread starter
Joined
Jun 22, 2014
Messages
7
Thanks! There is a post on the bulletin and info on how to use the choke afterwards.
 
Top