Replacing Starter

Trevor20228

Recruit
Thread starter
Joined
Mar 26, 2016
Messages
4
I need to replace the starter in my 1989 evinrude outboard motor is there a way to just take the starter and how would I do that
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The starter comes off with the bracket !------Why do you need to remove the starter ?-----They are generally very reliable ?
 

kbait

Commander
Joined
Nov 13, 2007
Messages
2,488
If yes to last post, disconnect battery and turn starter gear by hand. Spray a bit of pub blaster or WD40 on shaft gear rises on. Spin gear by hand again in both directions while pulling 'up' on gear. It should rise in one of the directions.. Now hook up battery, and try again. If it still doesn't engage, use jumper cables from your car battery straight to the starter, bypassing boat wiring. If it now engages normally, boat battery or wiring is faulty.
Good luck!
 
Top