dreese2005
Seaman Apprentice
- Joined
- Aug 21, 2010
- Messages
- 34
I have a 1976 Johnson 85 V4 Seahorse that has no fire on Cylinder#3 I have replaced the coil with a known good coil. still no fire. So at this point based on deductions I am guessing that the power pack is bad. I have a known good power pack from a 1996 V4 112 HP that I would like to use I can and have crossed referenced the wires and have figured out all but a few. here is what I know and what I need help with.
on the 76 there are 4 wires coming from under the flywheel 2 black with white tracers and two white with black tracers they go to terminal marked sensor 1 and sensor 2
on the 96 there are 5 wires green, pink, white, purple and blue I need to know how these wires connect to the black/white white/black wires and what the 5th wire is for?
any help would be greatly appreciated.
on the 76 there are 4 wires coming from under the flywheel 2 black with white tracers and two white with black tracers they go to terminal marked sensor 1 and sensor 2
on the 96 there are 5 wires green, pink, white, purple and blue I need to know how these wires connect to the black/white white/black wires and what the 5th wire is for?
any help would be greatly appreciated.