removing tight bolts

[knobby]

Re: removing tight bolts

When all else fails, say a prayer.<br />A boat in the water is not a problem, water in the boat, however, is.

 

[ob]

Re: removing tight bolts

FlyboyMarks method of bolt removal is right on the mark.Using a small acetylene tip,heat the bolt transfering heat down the shank until near cherry red and let cool completely before attempting removal.This is a standard procedure used in industry for years on frozen or binded bolts.While it is not always sucessful,it is the prefered method.

 

[js5278]

Re: removing tight bolts

I appreciate everyone's help. I managed to get all 14 bolts out, no snapping or stripping, and very little swearing. I was ready with the torch because when I had tested some of the middle bolts for movement, they seemed like they were going to be a challenge. Once I got the coils out of the way and got a ratchet on them, I was able to safely remove them with moderate pressure.

 

[jim dozier]

Re: removing tight bolts

You were lucky, you must be living right.

 

[Mathew15]

Re: removing tight bolts

Try some PB Blaster, its honestly the best penitrating oil youll find. Plus it won't dry out rubber hoses or seals like WD-40 will. Goodluck