Relocating a Fishfinder

TNelson

Recruit
Thread starter
Joined
Apr 7, 2009
Messages
2
I've got a Lowrance fishfinder mounted beside the console, transducer on transom.What would be the best way to move the fishfinder to the bow.
Can I leave the transducer and just move the fishfinder? Is there a cable that would extend the finder? Sorry if these are already posted I couldn't seem to
find the right post. Thanks, Tom

Boat is a 19ft tracker.Fishfinder is X47 for Tracker.
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: Relocating a Fishfinder

I've got a Lowrance fishfinder mounted beside the console, transducer on transom.What would be the best way to move the fishfinder to the bow.
Can I leave the transducer and just move the fishfinder?
Boat is a 19ft tracker.Fishfinder is X47 for Tracker.

You can, but most people mount them on the bow trolling motor. On the transom you would be seeing what was at least 19' behind you. There are a number of brackets to mount transom transducers to trolling motors. Sometimes you will pick-up noise on the trolling motor or depending on type/brand/model, the transducer cable becomes entangled in the some of the mechanisms if you are not careful. Some bow mounts include a universal sonar to get away from the cable pinching issues.

Is there a cable that would extend the finder? Sorry if these are already posted I couldn't seem to
find the right post. Thanks, Tom

If you are going to leave on transom, I'd check your current cable. It probably has enough length and is coiled up some where. If not, I expect Lowrance does have some extender cables. Humminbird has them in 10' increments for their units.
 
Top