FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
If the PTT unit is between the transom brackets, tilt the motor all the way up to expose the fill port. Fill it to overflowing and replace the fill cap and cycle it down and up to bleed. Repeat a few times until there are no bubbles in the PTT fluid.
That motor shows 3 different power trim units. If the unit is mounted in the boat, trim the motor up and find the SS fill screw on the pump in the boat and fill to overflow.
PTT units are usually filled with Dextron II ATF, but also could have 5W-30 motor oil as well, so see what you already have in it.