Jprevat
Petty Officer 1st Class
- Joined
- Apr 25, 2016
- Messages
- 321
Ok guys. I pulled the belts and no change. I pulled the intake and what I found was a slight rattle in the balance shaft. The cam looks good the lifters look good.
When I pulled the plugs my middle cylinder on the port side had a cracked insulator. Could that be the whole problem?
If I rock my breaker bar I am getting some kind of play down low. I'm guessing that there should be none. Correct?
When I pulled the plugs my middle cylinder on the port side had a cracked insulator. Could that be the whole problem?
If I rock my breaker bar I am getting some kind of play down low. I'm guessing that there should be none. Correct?