Raymarine L1250RC Plus Soiunder Inop.... ??

CaptainEric

Recruit
Thread starter
Joined
Aug 6, 2011
Messages
4
We have owned the boat for about a year and a half now, and just this last weekend at Catalina, the fishfinder stopped working. It displays the water temp, but the sonar display is all red, and the depth always reads 150ft; no matter where we are.

I called Raymarine's Tech Support, and the only thing he could tell me was to try swapping out the transducer, or try swapping out the L1250 unit (or L750 would work). Not so easy when you don't have expensive "spares" laying around.

I guess what I am looking for is someone local to Dana Point with a compatible, not-in-use transducer we could plug in and hang over the side; or if someone local has an L1250, or L750 we could plug into our existing transducer to test. I would be willing to pay for your time/gas to get to Dana Point.

Price-wise, I am hoping the transducer is bad, but I can hear/feel it clicking, and I don't have the dough to just cough up $400 for a new one and possibly be wrong.

Thanks in advance!
Eric
 

Pez Vela

Chief Petty Officer
Joined
Dec 4, 2004
Messages
504
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

Your idea is a good one if you can find the right person. I've got an L760RC Plus on my shelf, but I'm in San Diego. Can you post a pic of your FF screen for possible troubleshooting? I've never seen what you describe, and I've been running Raytheon/Raymarine gear for a loooooong time. My first suggestion is to rule out operator error by going through all your possible menu settings, if you haven't already. A factory reset would be another option, although you'll lose your waypoints.
 

CaptainEric

Recruit
Thread starter
Joined
Aug 6, 2011
Messages
4
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

First off, thank you for the reply. I am heading down to a San Onofre to meet a bunch of people for camping tonight, but I will stop by the boat on the way back up tomorrow and take a picture.

The first thing Raymarine's tech support had me do was to make sure I had the L1250 set as Master (no DSM installed); which it was. I tried setting it to Slave, but then I lost the temp read-out and depth went to dashes. Back to Master. He couldn't think of any other settings to try changing and suggested the swapping of parts.

Doing a factory reset couldn't hurt. Most of my waypoints are written down in my log book already anyway, so it would just be a matter of entering them all back in. I will try that tomorrow night as well.

If it came down to it, would you be willing to drive up some time for $$$? I will research to make sure the L760 would work with my 'ducer first.

Thanks again!
Eric
 

j_martin

Admiral
Joined
Sep 22, 2006
Messages
7,474
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

First off, thank you for the reply. I am heading down to a San Onofre to meet a bunch of people for camping tonight, but I will stop by the boat on the way back up tomorrow and take a picture.

The first thing Raymarine's tech support had me do was to make sure I had the L1250 set as Master (no DSM installed); which it was. I tried setting it to Slave, but then I lost the temp read-out and depth went to dashes. Back to Master. He couldn't think of any other settings to try changing and suggested the swapping of parts.

Doing a factory reset couldn't hurt. Most of my waypoints are written down in my log book already anyway, so it would just be a matter of entering them all back in. I will try that tomorrow night as well.

If it came down to it, would you be willing to drive up some time for $$$? I will research to make sure the L760 would work with my 'ducer first.

Thanks again!
Eric

On my (relatively) cheep Lowrance HDS5, I can save all my user info and restore it. Can't you?
 

Pez Vela

Chief Petty Officer
Joined
Dec 4, 2004
Messages
504
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

There's got to be a Raymarine boat on a neighboring slip that could help you out if you can walk your machine over there and hook up his power cable and transducer. Raymarine units have been using 7-pin connectors for a long time, so matching your unit to a Raymarine transucer cable shouldn't be a problem.
 

Attachments

  • 91_404.pdf
    49.1 KB · Views: 0

CaptainEric

Recruit
Thread starter
Joined
Aug 6, 2011
Messages
4
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

Yeah, ideally a neighbor having a compatible system would be best, but I only know a handful of the guys around me. I will ask around and hope for the best, but I have more sail than power on my dock.

As for saving my waypoints.... yes it is possible to save them to the Raytech software; if only I had the cable to connect my laptop to the system. Financial priority, at the moment, is getting the FF to work.
 

CaptainEric

Recruit
Thread starter
Joined
Aug 6, 2011
Messages
4
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

Well, again, thank you for the replies, but got it working. Did a factory reset and it works like a charm. Very strange. We didn't change any settings on our last trip. It literally worked one minute and not the next. Now to get a user card to save my waypoints to so if I ever has to reset, it won't take an hour to re-enter them all, hehe.
 

j_martin

Admiral
Joined
Sep 22, 2006
Messages
7,474
Re: Raymarine L1250RC Plus Soiunder Inop.... ??

Well, again, thank you for the replies, but got it working. Did a factory reset and it works like a charm. Very strange. We didn't change any settings on our last trip. It literally worked one minute and not the next. Now to get a user card to save my waypoints to so if I ever has to reset, it won't take an hour to re-enter them all, hehe.

It is a computer with an operating system, and apparently just like the infamous windows system, sometimes you have to reload it to make it go. That's what a master reset does. The operating system is on a read only memory module, and reset loads it into the device, wiping out all your settings in the process.
 
Top