raymarine dragonfly 4 ?

[newtoboat101]

have a raymarine dragonfly 4 pro and uniden 380 vhf question is can you interface the dragonfly 4 pro with uniden 380 ,so gps displays on vhf

 

[dingbat]

Looked through the documentation. No indication of any NMEA outputs on these units, eliminating the possibility of communicating to the outside world.

Of note, they specify the max. Relatively humidity level for the unit at 75%. Not good for a piece of equipment designed for operation in a marine environment.

 

[newtoboat101]

may not have described correctly uniden 380 vhf radio ,and raymarine dragonfly 4 what i am trying to accomplish is to send gps coridinates from dragonfly4 to my uniden 380 vhf radio . uniden has accessory wires to do this ,but dragonfly 4 does not have accessory wires ,just want to know if you can get gps coordinates from dragonfly 4 to uniden 380 vhf dingbat may have been referring to this on dragonfly ,but he didn't specify which documentation he was reading

 

[dingbat]

may not have described correctly uniden 380 vhf radio ,and raymarine dragonfly 4 what i am trying to accomplish is to send gps coridinates from dragonfly4 to my uniden 380 vhf radio . uniden has accessory wires to do this ,but dragonfly 4 does not have accessory wires ,just want to know if you can get gps coordinates from dragonfly 4 to uniden 380 vhf dingbat may have been referring to this on dragonfly ,but he didn't specify which documentation he was reading

I understand what you're trying to do very well and the answer is no. You can't send GPS data from the Dragonfly to the Uniden.

You need connect the two units via a NMEA 0183 or NMEA 2000 communication interface to transport the data. The Dragon Fly supports neither interface, thus no accessory wires and no transport of data.

 

[newtoboat101]

ok thanx for info appreciate it