Question on potential 1979 Evinrude 100 purchase

jhynesrockmtn

Recruit
Thread starter
Joined
Jul 19, 2018
Messages
2
Hi, new to the forums. I grew up with a late 60's Johnson 85 and later an early 90's Evinrude 90 with oil injection. I'm looking at a 1979 Silverline 17 foot with an Evinrude 100 that has been parked for 17 years inside. It all looks in excellent condition for the age. I would have a mechanic go through it. Any specific advice on this particular model or era of Evinrude motors or the wisdom of buying a 40 year old 2 stroke outboard?
 

Attachments

  • photo296240.jpg
    photo296240.jpg
    1.3 MB · Views: 0

havoc_squad

Senior Chief Petty Officer
Joined
Mar 5, 2011
Messages
741
Beats paying new if the price is right with good compression on all clyinders, lower unit, ignition, transom mount, and trim system are good.

If you make a living on the water, newer fuel injected outboards pay off for their higher cost due to the amount of fuel they burn per hour of use.

Unless the outboard won't run without oil injection, I will always prefer pre-mix only setup which that one is pre-mix only.
 

Bosunsmate

Admiral
Joined
Apr 7, 2012
Messages
6,135
Id have no worries buying a 40 year old motor if it was fresh water. Salt id be a bit reticent if it hadnt being maintained often, specifically the head and base plate gasket replaced as those bolts holding the powerhead on can become unruly stuck.
Looks a good motor with the decals and the sun in the background, we a midwinter here in New Zealand
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Those are a good motor if in good condition.
 
Top