Hello.
Recently, I purchased a 9.5 foot inflatable dinghy from a local bulk supply store for a very reasonable price. The boat includes a marine plywood transom in a nylon zippered sleeve and the boat is rated for a 30 lb thrust trolling motor.
I know next to nothing about motors or batteries, but the motors, at least, seem pretty straightforward. I've seen some Minn Kotas of this rating for fairly reasonable prices. Where I'm completely lost is in the department of batteries. The boat contains a pouch intended to hold the battery. Without measuring, I'd say the pouch is about 9" x 7" x 11" (l x w x h). I would ask for some recommendations for a waterproof battery capable of wiring easily to a standard trolling motor that would give me enough battery to slowly cruise around a lake for a couple of hours. My fear is a leaky battery that would adversely affect the boat OR a battery that does not respond well to getting wet.
Here is a picture of the boat, if that helps.
It floats well and sits fairly high. The design is such that it's a single tube that sits inside a zippered nylon sleeve. The bottom of the boat is a thick, rubber coated material upon which a "solid floor" of foam-backed plastic is placed. The manual says that the boat is designed to accomodate a little water in the flooring of the boat, though I've not experienced this. It was dry as a bone, but I'd like to be prepared for such an event.
Many thanks in advance.
Recently, I purchased a 9.5 foot inflatable dinghy from a local bulk supply store for a very reasonable price. The boat includes a marine plywood transom in a nylon zippered sleeve and the boat is rated for a 30 lb thrust trolling motor.
I know next to nothing about motors or batteries, but the motors, at least, seem pretty straightforward. I've seen some Minn Kotas of this rating for fairly reasonable prices. Where I'm completely lost is in the department of batteries. The boat contains a pouch intended to hold the battery. Without measuring, I'd say the pouch is about 9" x 7" x 11" (l x w x h). I would ask for some recommendations for a waterproof battery capable of wiring easily to a standard trolling motor that would give me enough battery to slowly cruise around a lake for a couple of hours. My fear is a leaky battery that would adversely affect the boat OR a battery that does not respond well to getting wet.
Here is a picture of the boat, if that helps.
It floats well and sits fairly high. The design is such that it's a single tube that sits inside a zippered nylon sleeve. The bottom of the boat is a thick, rubber coated material upon which a "solid floor" of foam-backed plastic is placed. The manual says that the boat is designed to accomodate a little water in the flooring of the boat, though I've not experienced this. It was dry as a bone, but I'd like to be prepared for such an event.
Many thanks in advance.