Q4 blower?

[jpd217]

I have a 07 Q4 I want to put some more spearkes in it and I was going to mount them in the back dummy holes, but it looks like only two are hooked up, but only one blows whats the deal? can I move one of the tubes or can I just unhook the one tube that does not blow?

 

[Ret USN CPO]

Re: Q4 blower?

Is it safe to assume you have an I/O and are talking about the ventilation inlets/outlets? If so, I wouldn't mess with them. Ventilating is a very important safety requirement. By changing the way the ventilation works, you may be breaking the law. I'm not positive about that, but I certainly would find a different location for the speakers.

 

[Hashi]

Re: Q4 blower?

Yup...Don't mess with the ventilation holes. You should have two sets of holes (connected by a hose and unconnected). The unconnected holes are for heat from engine to be emitted. The connected holes are for fresh air. Kinda works like a gravity feed system (hot air rises as cool air lowers). Cut new holes for speakers or get a wake board tower and mount speaker cans.

 

[jpd217]

Re: Q4 blower?

thanks for advice, I'll find somewhere to to put them.