Prepare boat after long storage time

[lgeorgieff]

I have an 1988 4-Winn's 180 Horizon with an OMC Cobra 4.3 litre, 6 cylinder<br />engine/stern drive. Due to work, I have not run the engine, much less been<br />on the lake in over a year. What do I need to do before I crank it up to<br />ensure I don't have problems? I know to drain oil, etc., but my concern is<br />the innards of the engine (rings?), outdrive, etc. Also, I should probably<br />drain gas? I don't know if there is an easy access to gas other than a long<br />hose and siphon. I'll appreciate any submissions as I don't want to ruin<br />the engine cranking it.<br />Thanks.<br />Lou Georgieff

 

[12Footer]

Re: Prepare boat after long storage time

How much fuel is in the gas tank? If it is under 1/4tank, go ahaed and fill it with fresh fuel. Any more than that, drain it.If the engine is carborated, drain the bowl. Drain the fuel lines . Spray a short burst of WD40 into each cylinder,and into the carb body before cranking it.<br />Cross your fingers. (no really, you should be set).

 

[Fouled Plug]

Re: Prepare boat after long storage time

I'd go ahead and change the lower unit lube as well. And when was that impeller last replaced?

 

[lgeorgieff]

Re: Prepare boat after long storage time

Thanks for the tips above and to any others that may post.<br />Lou Georgieff