Please Help

jonorth

Recruit
Thread starter
Joined
Jul 10, 2011
Messages
3
Silvertip or someone w/knowledge, please review my post of 7-11-11 titled "wiring troling motor direct, by passing plug in and charge/run switch, by jonorth....I want to be sure I have done this correctly and would appreciate any advice. Also can I hook up my guest 2 bank charger 5 amp each bank to the batts w/o any problems with this wiring setup? Thank you for your help....
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Please Help

If the wiring looks like this you are ok. That assumes of course that you totally bypassed the Run/Charge switch. You don't need a plug but it would sure make it more convenient to remove the motor for storage if its mounted on a quick release plate. A plug is simply a disconnect device -- no different than the plug on lamp in your house.

24VChargingSystem.jpg
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: Please Help

While you are at it you might want to concider this. it is a great save you some trouble later device! it's called a LVd. Works great




Yes- blog/blog is correct
SpamCan.jpg
 
Last edited:
Top