Please help, boating newbie needs help identifying a part.

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
First off I would like to say that I have been crawling around the forum for about a week doing some research and what not and there are some really nice and helpful people on here. Glad to see that this is such a great community of boaters, im looking forward to talking and helping others on here.

Now as for the help part. I bought a boat 2 days ago and all the electronics worked fine until the old owner tilted the motor down and drained the battery. He then decided to hook up his jumper cables and tried to start everything like that but nothing wanted to turn on, we then did some trouble shooting and he came to the conclusion the it was a faulty part which i need help identifying. He said that it looked like another wire or a piece of metal touched it and shorted it out judging by the white marks on the metal connectors. I was planning on redoing all the wiring but I need help on identifying what the exact name is and what its exact function is so I can go purchase another one tomorrow and redo all the wiring. Any help is greatly appreciated and sorry for the crappy pictures. Thanks in advance guys.


IMG_0850.jpg

IMG_0846.jpg

IMG_0845.jpg

IMG_0836.jpg

IMG_0835.jpg
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,545
Re: Please help, boating newbie needs help identifying a part.

Ayuh,... Welcome Aboard,....

That looks like a busted up, corroded to 'ell old Solenoid, that probably controls the trim/ tilt....

where to the wires come from/ go too,..??

Knowin' the motor/ drive will probably be Helpful...??
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: Please help, boating newbie needs help identifying a part.

Welcome to iboats!:cool:

That looks like a tilt & trim relay or solenoid, perhaps this one. What motor do you have?
 

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
Re: Please help, boating newbie needs help identifying a part.

Sorry I left the part out. Its a mid 80s Johnson 85hp 4 cylinder 2 stroke javelin series. The wire seem to be running to the bilge and to the motor, and maybe back to the switch panel and the throttle but i me be wrong about that. The old owner wasnt very electrically inclined so its just a mess back under the seats by the outboard. And if its the part for the tilt and trim then now im wondering why I wasn't able to turn the motor over with the jumper cables on the car. We checked all the fuses and connections. When he first tried to fire up the motor the tilt was working and the electric choke was as well its when he depleted the battery by tilting the motor when we ran into this problem.
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,545
Re: Please help, boating newbie needs help identifying a part.

The wire seem to be running to the bilge and to the motor, and maybe back to the switch panel and the throttle but i me be wrong about that. The old owner wasnt very electrically inclined so its just a mess back under the seats by the outboard.

Ayuh,.... I hope yer more electrically inclined,..??

You've gotta Know what all those wires go to, not be guessin'...
It may well be that, that solenoid is the startin' circuit, but I doubt it,...
Donno...???

There's some stickies at the top of the forum,...
Have a look around,... I'm sure it'll Help...
 

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
Re: Please help, boating newbie needs help identifying a part.

Ayuh,.... I hope yer more electrically inclined,..??

You've gotta Know what all those wires go to, not be guessin'...
It may well be that, that solenoid is the startin' circuit, but I doubt it,...
Donno...???

There's some stickies at the top of the forum,...
Have a look around,... I'm sure it'll Help...

I am more electrically inclined but I have always been around cars, so some of this stuff is new to me but yeah i will have that birds nest of wire all straitened out by tomorrow. It was just starting to get dark and I couldn't really tell where they ran to. But thanks for the help, I will take a look at those stickies.
 

NHGuy

Captain
Joined
May 21, 2009
Messages
3,631
Re: Please help, boating newbie needs help identifying a part.

You say the battery depleted when tilting the motor. There is a possibility that the solenoid is stuck in the on position. There could be other issues too.
A bad battery can make a perfectly good electrical device act wrong. Take out the battery and put it on a slow charge, if it will even take one.
Then, get the wiring that you will address diagrammed onto paper. I'd start by making a good drawing with colors etc., and taking photos of all the connections. If you are really leery you can label the wires, but that's a pain, I'd only do that if there's more than 1 of the same color. Then remove each connection clean it up & put it back together, and grease them afterward with dielectric grease. You clean the flat ends with emery cloth and the component terminals with a little wire brush. I like the brass brushes, they don't dig into the contact surfaces on your contacts as much as some more aggressive abrasives do. Just sand or brush enough to get things kind of shiny, don't dig any deeper than necessary.
If that doesn't do the trick at least you will have good connections to work with while you test. If the stickies don't work you can probably get the manual for your motor, and look up the issue there.
Someone in the forum may have links to the manual or might have had the same issue you have.
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: Please help, boating newbie needs help identifying a part.

This appears to be the exact replacement part.

Shop for a repair manual here if you can't find a factory manual.

Since the tilt & trim apparently worked previously, you can most likely transfer the wires to the corresponding terminals on the new relay.
 

fucawi

Banned
Joined
May 18, 2011
Messages
1,039
Re: Please help, boating newbie needs help identifying a part.

Well it aint a trim and tilt ..for that you need two double pole change over relays and that is a ford type starter solenoid.....sometimes used for a dual battery coupler ..not suitable as not continuously rated ..if you have another in the OB for the starter then who knows.. often its better to strip out all the old crud wiring and start again..I always end up with a pile of old wires on the floor when I buy a new old boat ....good luck ..more photos and more questions please...
 

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
Re: Please help, boating newbie needs help identifying a part.

Well it aint a trim and tilt ..for that you need two double pole change over relays and that is a ford type starter solenoid.....sometimes used for a dual battery coupler ..not suitable as not continuously rated ..if you have another in the OB for the starter then who knows.. often its better to strip out all the old crud wiring and start again..I always end up with a pile of old wires on the floor when I buy a new old boat ....good luck ..more photos and more questions please...

Thanks for helping out, greatly appreciated. I will be going to a few marine parts stores today. What do I ask them for exactly to get a replacement for that. What I mean is there a generic part that will work for my application? And if you know a ballpark figure of what I might encounter in terms of price. And yes I have two batteries on board.
 

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
Re: Please help, boating newbie needs help identifying a part.

You say the battery depleted when tilting the motor. There is a possibility that the solenoid is stuck in the on position. There could be other issues too.
A bad battery can make a perfectly good electrical device act wrong. Take out the battery and put it on a slow charge, if it will even take one.
Then, get the wiring that you will address diagrammed onto paper. I'd start by making a good drawing with colors etc., and taking photos of all the connections. If you are really leery you can label the wires, but that's a pain, I'd only do that if there's more than 1 of the same color. Then remove each connection clean it up & put it back together, and grease them afterward with dielectric grease. You clean the flat ends with emery cloth and the component terminals with a little wire brush. I like the brass brushes, they don't dig into the contact surfaces on your contacts as much as some more aggressive abrasives do. Just sand or brush enough to get things kind of shiny, don't dig any deeper than necessary.
If that doesn't do the trick at least you will have good connections to work with while you test. If the stickies don't work you can probably get the manual for your motor, and look up the issue there.
Someone in the forum may have links to the manual or might have had the same issue you have.

Thanks for the great advice I was thinking of doing just that.
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: Please help, boating newbie needs help identifying a part.

Did you miss Bob's post above? $23 for the Sierra part.

18-5814.jpg
 

Japanrote46

Cadet
Thread starter
Joined
Dec 10, 2011
Messages
6
Re: Please help, boating newbie needs help identifying a part.

Did you miss Bob's post above? $23 for the Sierra part.

18-5814.jpg
Oh sorry I was under the impression that was for the tilt and trim. Then fucawi commented and said it was a ford type starter solenoid. And the above part says it part of the tilt and trim
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: Please help, boating newbie needs help identifying a part.

It is the trim soleniod for your OMC, which is what most said it was. It matches what you have in the picture that you are trying to replace. If it looks like a Ford starter solenoid, so be it. Yours appears to have the casing cracked in a couple of places. Probably worth replacing even if it is not causing your current issue.
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: Please help, boating newbie needs help identifying a part.

that is a ford type starter solenoid
Nah, the wires on the larger posts are nowhere near large enough to run the starter. And a typical Ford starter solenoid (it's actually a relay, not a solenoid, BTW) looks like this:
2011-05-05_232838_86_ford_solenoid.jpg
 

fucawi

Banned
Joined
May 18, 2011
Messages
1,039
Re: Please help, boating newbie needs help identifying a part.

Well its not being used for starter duty as the wires are not thick enough...Bubba is right you need to sort out what its doing ..If its part of the dual battery set up then forget it its not suited to the job and there are better ways. Perhaps someone can tell me how you reverse the motor in a trim tilt with a single paire of NO contacts ??? you cannot.
so find out where the wires go ..draw it on a paper and photograph it then we can all have a look.....Maybe somebody bodged the trim tilt and used this as an on/off switch ...Time to test not guess
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Please help, boating newbie needs help identifying a part.

As I recall, some tilt & trim units require only one pair of contacts since the "loading" is in the UP-TRIM position. Much lower current draw in the DOWN-TRIM direction so the reversal can be done at the switch. Not sure that's the situation here but certainly possible. There does appear to be two wires on one of the large terminals so that may indeed be the case. One of those two wires would come from the "DOWN" position on the switch.
 
Top