Pflueger trolling motor

tevz32

Recruit
Thread starter
Joined
Aug 3, 2009
Messages
2
I have a vintage Pflueger trolling motor. I have been successful in getting it working but am stumped by a push button switch at the end of the tiller. The motor would not work until I disconnected the the switch and taped the two wires together. The motor now works at fwd & reverse and at all speeds but I don't know what the switch if for. Any ideas?
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Pflueger trolling motor

It is probably the on off switch. Some of those older motors also had a small light under the housing and the switch may have been for that. Check the other controls. There should be a FWD-OFF-REV switch or the tiller handle may have an OFF position.
 
Top