Penn Yan 265 Hull Drain Location?

Status
Not open for further replies.

captainhank

Recruit
Joined
Apr 22, 2023
Messages
1
I'm a new 265 Hardtop Owner and I have no idea where the hull drain plug is located. The first examination of the engine compartment and all other compartments is a little overwhelming to someone like me who has only had experience with less complicated boats with much less electronics and plumbing. It will all make sense as time goes on but at the moment I'm a little shell shocked. The boat has been shrink wrapped for the preceding 15 years.
Henry
 

Attachments

  • 20230418_110345_HDR.jpg
    20230418_110345_HDR.jpg
    2.5 MB · Views: 2
  • 20230418_165808_HDR.jpg
    20230418_165808_HDR.jpg
    1,020.2 KB · Views: 2

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,126
The garboard plug is typically located just above the keel on the transom
 

JhuddsOhana

Recruit
Joined
Aug 23, 2022
Messages
1
I'm a new 265 Hardtop Owner and I have no idea where the hull drain plug is located. The first examination of the engine compartment and all other compartments is a little overwhelming to someone like me who has only had experience with less complicated boats with much less electronics and plumbing. It will all make sense as time goes on but at the moment I'm a little shell shocked. The boat has been shrink wrapped for the preceding 15 years.
Henry
Our 30' Penn Yan Twin tunnel drive has the drain plug midships just in front of the engines. Right beside the keel. Not sure if yours is the same.
 
Status
Not open for further replies.
Top