Paint the inside of hull on 1964 Starcraft...help?

[jdwilliams1]

OK, the motor is getting close to running perfect and the seats will be back from upholstery this week and now I have to finish up the hull.

My question is I need to refinish the inside with paint and I need to know what process you experts would take to do this the right way....

Products, paint, sanding necessary etc.

Thanks in advance.

 

[Woodonglass]

Re: Paint the inside of hull on 1964 Starcraft...help?

Check out page#10 in my "My Flamingo" thread listed below. It has all the info you need for painting your deck with Rustoleum. Your boat looks a lot like mine. You could also Gelcoat you deck. friscoboater has a video on that. I chose to use the Rusoleum and a little bit of sand for texture. I like it a lot. But my boat is used mostly for cruising. Not to much KID activity in her.

 

[jdwilliams1]

Re: Paint the inside of hull on 1964 Starcraft...help?

Check out page#10 in my "My Flamingo" thread listed below. It has all the info you need for painting your deck with Rustoleum. Your boat looks a lot like mine. You could also Gelcoat you deck. friscoboater has a video on that. I chose to use the Rusoleum and a little bit of sand for texture. I like it a lot. But my boat is used mostly for cruising. Not to much KID activity in her.

So I do not need the ether since it is a fiberglass boat correct?

Also, I see you recommend the Rustoleum Primer, but what paint do you recommend? Do you add the hardener to the paint?

 

[Woodonglass]

Re: Paint the inside of hull on 1964 Starcraft...help?

Rustoleum all the way.

Primer and Paint. No hardener in the primer