Open cooling system question

Drcoffee

Petty Officer 1st Class
Joined
Aug 26, 2021
Messages
220
Rinker 1995 Captiva 212 5.7 merc alpha 1 gen 2

had the boat out yesterday for first time this season. After doing full tune up, impeller, new bilge blower, and a dozen misc updates, it really runs out nice. Fires right up hot or cold.

my question is this. After cruising the lake and then shutting down, anchoring out to relax, I took a quick look around the engine. The fresh water supply hose to the circulating pump seemed to be pressurized. On an open cooling system is that even possible? If not, what would cause this?
 

Attachments

  • EE2562DE-8C21-4223-BAFA-28D6AF5F3775.jpeg
    EE2562DE-8C21-4223-BAFA-28D6AF5F3775.jpeg
    1.8 MB · Views: 7

Drcoffee

Petty Officer 1st Class
Joined
Aug 26, 2021
Messages
220
When I squeezed the large hose, it didnt compress much. much like when you check your cars cooling system. Maybe nobody has thought to check theirs, but it just seemed strange if the boat doesnt have a closed cooling system.
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
As well as being quite stiff, that hose alway has an internal spring. That's why it is difficult to compress. It's not pressurized.

Chris ..
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,065
There is no issue, there is a spring inside the hose to keep it from collapsing
 

Drcoffee

Petty Officer 1st Class
Joined
Aug 26, 2021
Messages
220
Interesting. Thank you. I took the hose off when I winterized it but did not notice it then. that makes sense, so the hose doesnt collapse under suction.
 
Top