One more question

[Dutchoven]

I just ordered the gasket set for the two line tank. Ill fix that. How many pumps do i give the primer before pulling? And does anybody have a copy of the 15014 manual ? I need to replace the little springs in the recoil starter that engages the pawl to turn th motor over. I just ordered the spring set from Jeff too. Sure could use a look at a picture or drawing of the spring arrangement.

You could email it to jerryoven@yahoo.com

Thanks again all of you!

 

[DJ]

Re: One more question

As far as the tank pump goes. Pump until the button gets too hard to push.

 

[F_R]

Re: One more question

As for the springs, they merely are hooked to the pawl and the tab on the equalizer cup such that they pull the pawl into engaged position when the rope is pulled. X3.

 

[tashasdaddy]

Re: One more question

pumping the tank usually is different every time. hot day/ full tank 4 or 5 pumps, cold day/ 1/2 tank 15 pumps. mine is set up so well, i only run about 3 - 4 tanks fulls a year. sent you an email of the recoil.