Oh crap

Buckeyesnookhunter

Cadet
Thread starter
Joined
Jun 19, 2017
Messages
13
I got a feeling this was not suppose to happen I was trying tio change the fuel line that goes from the fuel filter to the top carburetor on my 1974 Johnson Outboards 50 - 50ESL74M and when I removed the clamp from the feed to the carburetor this happen (see picture) Why Am i thinking That The Brass nipple was not suppose to come out of the carb. anyone know what this is and what I did and how do I repair. :eek::eek::eek::eek::eek::eek::eek::eek::eek::faint2::faint2::faint2::faint2::faint2:
 

Attachments

  • photo291826.jpg
    photo291826.jpg
    85.3 KB · Views: 0
  • photo291827.jpg
    photo291827.jpg
    53.8 KB · Views: 0
  • photo291828.jpg
    photo291828.jpg
    73.7 KB · Views: 0

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
53,415
permatex #1 around the outside and tap it back in.
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Hope it isn't cracked at the bend.

Next time, cut the hose instead of trying to pull it off. Often old low pressure hose doesn't even need clamps because the hose is stuck to the barb and hard as a rock.
 
Top