Not peeing

[wayxware]

6hp Evinrude year unk . Changed impeller and head gasket. Motot cranks and runs fine. will not pee.

 

[slackeribew]

Re: Not peeing

you might try blowing in your outlet with air hose or stick a piece of wire up. mine did the same thing had spider web and it was glogged might be worth a try lol

 

[Brianjason6]

Re: Not peeing

How long did it run. Give it at least 20 seconds. Be sure you water tube is connected properly. If it has a thermostat, it may be sticking. It would be on the top of your cylinder head cover...Noticable. The water could be obstructed anywhere...start at you lower unit's water inlet screen. If you take the lower unit back off shoot some water, from a hose, up through the water tube. It should circulate and exit the tale tell hole. Also..did you make sure your impeller key didn't fall out?

 

[Lion hunter]

Re: Not peeing

Do youhave the model number?

Are you running it in the lake or a barrel? If a barrel how deep up the leg is the water? I'm guessing it has an actual pee hole and not just the exhaust. If so remove the hose and make sure it is clear. You may have to take the impellar back apart if you didn't get the tube hooked up right.

 

[kenmyfam]

Re: Not peeing

Post model number so we can get a year on this motor.