Re: No spark on 94' Johnson 150 Oceanrunner
Sappet.... Remove the s/plugs. Disconnect the RED electrical plug at the engine. Rig up some kind of spark tester to set a 7/16" gap. Crank the engine by engaging the starter solenoid.<br /><br />If you now have spark, the engine components are okay and the problem would be in the instrument wiring harness (RED plug forward) or the ignition switch.<br /><br />To check the ignition switch, assuming there is spark at the engine as above and no shorts exist in the harness, Connect the RED electrical connector together, then remove the black/yellow wire from the ignition switch and re-check the spark, cranking the engine with the ignition switch.<br /><br />If you now have spark with that black/yellow wire removed but do not when it's connected to the switch, replace the ignition switch.