no spark in 1975 6hp evinrude

rjk128

Recruit
Thread starter
Joined
Aug 3, 2003
Messages
2
The upper cylinder is not firing I have cleaned the plugs & switched them around so that's not the problem the chamber is getting fuel but there is no spark to the plug. I'm looking for a little direction would it be the magneto and/or the plug wire?
 

OBJ

Supreme Mariner
Joined
Dec 27, 2002
Messages
10,161
Re: no spark in 1975 6hp evinrude

Hi ya' rjk, welcome to the forums...<br /><br />Your system is rather an easy system. Pull the flywheel off and take a good look at the coils, there are two, one for each cylinder and the points and condensers.<br /><br />If the coils are cracked and have seen their better days, replace them. Same with the points. Don't know how long you've owned the little shaker but they are really nice running engines when tuned up right. <br /><br />If ya' don't have a manual, by all means get one. They are invaluable when working on even these smaller engines. Good Luck!
 

rjk128

Recruit
Thread starter
Joined
Aug 3, 2003
Messages
2
Re: no spark in 1975 6hp evinrude

Thanks OBJ I've owened the little monster for about 8 years with out a single problem. I wouldn't trade her for the world she's gotten me through some pretty bad weather a time or two.
 

gustav

Cadet
Joined
Jul 16, 2003
Messages
12
Re: no spark in 1975 6hp evinrude

hello , i have got the same problem, same cylinder<br /> on my 6hp fisherman, i posted yesterday and asked for help with low power, alcan sent me some good advice. thanks for yours too, looks like were in the same boat!*!*! gustav
 
Top