newbie electronics question here

jvjernig

Recruit
Thread starter
Joined
Jul 28, 2008
Messages
1
Hello,
I just recently picked up a 14 foot jon boat and I am planning on upgrading it. I have seen jon boat mods all over the internet but none of them have answered the question about hooking up electronics. My main concern is hooking up the electronics in a safe manner. I plan on hooking up an accesory plug, running lights, and a blidge pump for now. What exactly will I need and what steps will i need to take to insure the safety of my boat and myself. I know i will need a fuse panel and a battery, but beyond that I am lost.

Thank you in advance.
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: newbie electronics question here

What you need depends on where you plan to install the switches for the various items you will be running. For your installation, I would buy a four switch panel that has built-in circuit breakes for each switch. You mount that wherever you want. If this is a tiller steered boat you would want it at the back, typically on the port side. You will have two #10 wires (red and black) that run from the battery to power the panel. Include a 20A circuit breaker at the battery POS terminal. From the panel you run a wire from the switch to the device you want that switch to control. The ground wire on each device comes back to the ground connection on the fuse panel or the NEG terminal of the battery. That wiring can be #16 or #14 if you want a little extra insurance. Depending on what you will be powering with the cigarette style outlet, that wiring should be #14 or #12 - especially if you plan on powering a huge spotlight or other high current devices. Nav lights can be #16 as they are very low current draw.
 
Top