Ok, long story but accident in boat caused the throttle to go from about 4600 RPM in forward directly to reverse no neutral. Ending up blowing the drive shaft in 3 places. The unit housing on my lower end (which amazingly has not alterations or dents due to this accident) has 1667-9010-C stamped on it. By the way I have a 1996 90HP ELPTO outboard (Don't know if I can post Serials here or if I should so I won't). I'm looking for some replacements but I can't find any that say this number. I've went to mercury's part website but every time that i put in my serial number it tells me it can't find it.
My question is if I have found a 1994 Tracker Pro Series 90HP lower end that has 1667-9010-c3 stamped on it will this work with my motor as a direct replacement? If not can someone direct me to where I can find info on what will directly fit. Or if someone can tell me what spline(?) I should be looking for or how I can tell based on my motor and the parts laying in my garage then please let me know. Thanks in advance.
My question is if I have found a 1994 Tracker Pro Series 90HP lower end that has 1667-9010-c3 stamped on it will this work with my motor as a direct replacement? If not can someone direct me to where I can find info on what will directly fit. Or if someone can tell me what spline(?) I should be looking for or how I can tell based on my motor and the parts laying in my garage then please let me know. Thanks in advance.
