Need Motor Guide Part

[rjolley]

I have an 80's model Motor guide tracker, foot controlled trolling motor. I bumped a dock yesterday in rough water and broke to top off and it is in the lake. Anyone have this part laying around <br />or have an idea where I can get one. Thanks

 

[trumanlake]

Re: Need Motor Guide Part

a model number would be good. use to have a motorguide service center for years till about 99. still have some of the old parts kicking around. need more info.

 

[rickdb1boat]

Re: Need Motor Guide Part

Might try here, also:<br /><br /> web page

 

[rjolley]

Re: Need Motor Guide Part

thanks for the replies, I got one at trolling motor parts.

 

[bubbakat]

Re: Need Motor Guide Part

Thanks guys for posting this. I found the parts I needede and I didn't even ask the question.

 

[ketron47]

Re: Need Motor Guide Part

trumanlake<br /><br />Do you have anything for a Motorguide Brute, Model #750, 41 lbs thrust with 12/24 foot control.<br />Year is unknown. Looking especially for owner and/or repair manual. Thanks (zketron@wmconnect.com)

 

[Johnny O']

Re: Need Motor Guide Part

Originally posted by trumanlake:<br /> a model number would be good. use to have a motorguide service center for years till about 99. still have some of the old parts kicking around. need more info.

 

[Johnny O']

Re: Need Motor Guide Part

Trumanlake<br />Own a #750 also. Looking for prop & nut part numbers. Also need to upgrade the foot peddle any suggestions?.If not do you happend to have the 12/24 volt switch for the peddle?

 

[trumanlake]

Re: Need Motor Guide Part

kentron, what year? depending on the year all i would have is wiring and break down.<br />johnny, was that one of the old flat pedals? year?