Need impeller Kit for 88 force 50HP

[Brad Hill]

Does anyone know where I may buy an impeller Kit for "88 Force 50 HP. Water not flowing like it should and I think it's time to replace the impeller. Just bought this boat (15' Bayliner) and don't know how long it's been since replacement. Having trouble finding parts/anyone to even work on it. Thanks

 

[fixin]

Re: Need impeller Kit for 88 force 50HP

Try here,you need you ser#<br /> http://www.mercurypartsexpress.com/PartsExpress/ProductSelection/ServiceParts/sphome.asp?CID=

 

[roscoe]

Re: Need impeller Kit for 88 force 50HP

www.mercruiserparts.com<br /><br /> http://www.mercruiserparts.com/selectModels2.asp?type_id=FORC <br /><br />At the link above, select the model and year, then select the gear housing, then look ate picture.<br /><br />Or, any Mercury dealer.<br /><br /> Or, http://www.maxrules.com/fixforcecool.html#33065 <br /> Part number 47-F433065-2<br /><br /><br />Or, www.dougrussell.com

 

[Brad Hill]

Re: Need impeller Kit for 88 force 50HP

Thanks Guys, I've ordered impeller and thermostat this morning and will let you know how the install goes ( I've never gone into before. Are there gaskets included (or needed)?

 

[scotiany]

Re: Need impeller Kit for 88 force 50HP

I can't speak to Force engines but, on the Chryslers you have to install impeller from the top of the drive shaft. I learned this costly lesson last summer.

 

[sheaston]

Re: Need impeller Kit for 88 force 50HP

i just change impeller in my 1990 50 hp force the worst part was adj. the shift linkage, and getting the brass ring off the drive shaft,other than that all went well <br />the whole process took about 2 hrs (my first time doing this)<br /><br />i did not have any gaskets to change