To those that are following this is what I found when I got the motor out and pulled the oil filter. Now I wasn’t surprised about the filter being full of water. When I got the boat the intake was off of it, so i already figured water got in it. When I dropped the oil pan the crank, rod caps, main caps, pistons, rods, even the cylinder walls from underneath looked like a fresh rebuild, with that being said I pulled the plugs and filled with trans fluid. Still would not budge when I pulled plugs. Gonna let it sit a couple days and let the fluid work it’s magic. Worst case scenario I have 2 other motors available so not a major deal.