Need help with shifter quicksilver

[Donoway80]

Took shifter apart can’t figure out how to get back together had pushed it forward to get set screw out do not know how line back up to have forward an reverse an neutral thanks for any help

 

[alldodge]

Don't understand the problem fully

Throttle goes full forward to be able to remove "throttle only button" then the center bolt can be removed. It goes back together the same way

 

[Donoway80]

Don't understand the problem fully

Throttle goes full forward to be able to remove "throttle only button" then the center bolt can be removed. It goes back together the same way

There is no center bolt model number is 88150a7

 

[alldodge]

There is no center bolt model number is 88150a7

I said bolt but meant nut

In any case your have a lock ring (item 4) and there is very little info on assembly as you have found. This is all I have found

https://www.mercruiserparts.com/bam/subassembly/32078/1989/50

 

[04fxdwgi25]

I have the manual for all the Mercontrols, if you want it.

Too big to post here @24 meg

PM sent

Per the manual, shifter should be in neutral to reassemble.

 

[Donoway80]

I have the manual for all the Mercontrols, if you want it.

Too big to post here @24 meg

PM sent

Per the manual, shifter should be in neutral to reassemble.

Thanks a lot for info I tryed buying pdf online never got it no return email

 

[04fxdwgi25]

Check your mail at the top of the page........