NEED HELP WITH EVINRUDE MOTOR

[helen deaton]

I HAVE A 1968 EVINRUDE 85HP MOTOR WITH AN EXHAUST LEAK IT IS SMOTHERING THE CARBS OUT WHEN YOU PUT THE COVER ON HOW WOULD YOU FIX THE EXHAUST LEAK AND WOULD IT HAVE SOME KIND OF SEALS OR ANYTHING TO FIX IT

 

[alcan]

Re: NEED HELP WITH EVINRUDE MOTOR

Hi Helen<br />The first thing you need to do is determine where the leak is. If a gasket or rubber seal is found defective. Replace it. You may find a cracked or corroded housing, in this case you may have to replace this part, how ever quite a few times these can be welded. I don't really think we can do more for you until we know where the leak is comming from???

 

[helen deaton]

Re: NEED HELP WITH EVINRUDE MOTOR

THANX ALCAN BUT WOULD YOU KNOW IF THERE IS A RUBBER SEAL ANYWHERE AND WHERE AT WE DONT KNOW WHERE TO LOOK HAVE YOU GOT ANY IDEAS

 

[alcan]

Re: NEED HELP WITH EVINRUDE MOTOR

Hi Helen<br /> I replied to your previous post on this subject a few days back. Please go back and pull it up.

 

[alcan]

Re: NEED HELP WITH EVINRUDE MOTOR

Hi Helen<br />You may also have exhaust plate/manifold gaskets leaking. My best advice is for you to obtain a manual that covers this model. These books will probably not cover exhaust leaks per say, but once you understand how the motor works you will have a better idea of where to look. You are going to need a book to repair the thing anyway. I am not a manual salesman. You may find a copy at your public libaray or borrow one from a freind. Book stores carry them and so does I-boats at the bottom of the page.

 

[helen deaton]

Re: NEED HELP WITH EVINRUDE MOTOR

THANKS ALCAN BUT WOULD YOU KNOW WHERE THE SEALS ARE LOCATED WOULD IT BE THE RUBBER SEAL ON THE BOTTOM OF THE COVER BECAUSE THAT IS TORE UP PRETTY BADLY

 

[helen deaton]

Re: NEED HELP WITH EVINRUDE MOTOR

DOES ANYONE KNOW ANYTHING ABOUT THIS

 

[Fouled Plug]

Re: NEED HELP WITH EVINRUDE MOTOR

You have some good advice so far. The best? Get a manual!