Need help identifying if exhaust elbow is good

[Nicyutrick]

Replacing the gaskets on the elbow exhausts cause it was rusting and leaking. Can I get a verification from the pictures that the elbow exhaust assembly is still good?

Thanks I’m advance!

 

[alldodge]

Looks are ok, but are they flat?
Take a framing square or other steel ruler and suck and see if they are flat. Might need to put a flat file across them to true them up

 

[Nicyutrick]

Looks are ok, but are they flat?
Take a framing square or other steel ruler and suck and see if they are flat. Might need to put a flat file across them to true them up

Right on. Thank you. Didn’t know if cause they were leaking the rust in the ports was okay or not.

 

[04fxdwgi25]

Those rusty cavity areas are the water jacket. They will rust.....

 

[tank1949]

Replacing the gaskets on the elbow exhausts cause it was rusting and leaking. Can I get a verification from the pictures that the elbow exhaust assembly is still good?

Thanks I’m advance!

If they are salt used and over 4 years old, pitch them. If not, you should create a piece of flat metal and block off motor side, then pour acetone into the water side and check for leaks.