Need carb rebuild directions / float settings for 2002 90 hp Johnson - j90plsnf

[Unsinkable1212]

I have the manual on order but not due to arrive for several days. Wondering if anyone can provide the correct procedure here. I rebuilt all 4 carbs w/ kits and installed new float chambers (ones I replaced were warped). I did not adjust the new floats at all. Wondering if this is what is causing motor to struggle under load?

Thank you!

 

[Chris1956]

On my '98 Johnny, the float must be level with the carb top. So invert the carb and observe the float and carb body. They should be parallel. Turn the carb over and check the float drop. It should be 11/16 - 1 1/8 i

 

[Unsinkable1212]

Appreciate the info! Will follow up once complete