NEED advice on painting a alpha one stern drive please!

AlphaGreg

Cadet
Thread starter
Joined
Apr 9, 2012
Messages
7
Hi everyone,

I did do a search on the subject but I just can't seem to find the answers I'm looking for. I recently bought a boat and the stern drive has a lot of barnacles on it, so I'm looking to clean it up.

Questions,

1) Do I just start hand sanding the barnacles off and get to the bare metal?

2) Once sanded do I spray it with epoxy primer?

3) Then do I hit it with rustolem? then put anti fouling over the rustolem?

4) How should I paint the prop, or should I just leave it alone?

I know not to paint over the anodes and the water intake holes, is there anything else I should know?

Thanks for all of your help, and patience with the noobs questions.

Here is a pic of the stern drive, and all the white is barnacles, not exposed metal.

http://s1265.photobucket.com/albums/jj507/alphagreg1/?action=view&current=Sterndrive.jpg

Thanks again for your help!
 

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,993
Re: NEED advice on painting a alpha one stern drive please!

Clean it, sand it, prime it.

You need a zinc chromate primer on the aluminum.
Mercury sells a non-zinc-chromate primer for its outdrives now.

Or you can buy Moeller primer.

Rustoleum also makes a zinc chromate industrial primer.



Lots of places are getting away from this primer though, for health reasons.


Rustoleum commercial or industrial enamel will work fine.
 

tpenfield

Moderator
Staff member
Joined
Jul 18, 2011
Messages
19,644
Re: NEED advice on painting a alpha one stern drive please!

That looks more like corrosion than barnacles . . . maybe it is just the picture.

Barnacles should pop off with a scraper if they are well deceased. You could also power wash and get some results.

I would scrape first then sand afterwards.

Interlux Primocon primer would be good.

Then the black paint (rustoleum is fine)

Antifouling paint - this is going into salt water, right?

Anodes - a full kit, to protect the outdrive from further corrosion.

If the boat is staying in salt water, then paint the propeller too. That looks like and aluminum prop, so it can be prepped and painted in a manner similar to the outdrive. The paint will come off of the propeller fairly quickly, but, hey, what are you gonna do?
 

AlphaGreg

Cadet
Thread starter
Joined
Apr 9, 2012
Messages
7
Re: NEED advice on painting a alpha one stern drive please!

Awesome, thanks for the quick replies!

Yes the boat will be in salt water for the whole summer, I thought about painting the stern drive when I was prepping the hull to apply micron 66 bottom paint.

The surveyor I hired to look over the boat said that its just a build up of barnacles and there wasn't any corrosion, except on the anodes.

I plan on painting the stern drive on the boat, can I paint the transom bracket as well?

Just to confirm, i just use regular rustoleum paint that I would buy in the hardware store?

One last thing,

Just say the marine surveyor was wrong and that is corrosion, what happens if I still paint it? just curious.
 

Bob_VT

Moderator & Unofficial iBoats Historian
Staff member
Joined
May 19, 2001
Messages
26,121
Re: NEED advice on painting a alpha one stern drive please!

Sand it to the bare metal and it should be smooth. Prime and paint.

All of your efforts are in the prep for the best paint results.

Welcome to iboats.
 
Top