SHOKENRYU
Cadet
- Joined
- Aug 21, 2021
- Messages
- 17
1993 Johnson 9.9 hp J10RETM
Water pump was just replaced. It was pumping out a strong stream then stopped. Ive check the flush screw and it is bone dry. Leading me to belive it is the thermostat stuck closed. I don't want to open it until I can get a replacement seal.Where can I find a thermostat kit with gasket and seals for this motor? Thanks in advance. ❤
Attachments
-
20210821_112152.jpg1.1 MB · Views: 8
-
20210821_112156.jpg1.2 MB · Views: 4
-
20210821_112203.jpg1.3 MB · Views: 5
-
20210821_112210.jpg2.4 MB · Views: 5
-
20210821_112215.jpg768.8 KB · Views: 5
-
20210821_112217.jpg1.2 MB · Views: 5
-
20210821_112227.jpg1.4 MB · Views: 6
-
20210821_112233.jpg1.2 MB · Views: 8
-
20210821_112237.jpg2 MB · Views: 9