Navigation lights not workng

Marbug

Recruit
Thread starter
Joined
May 25, 2011
Messages
1
I have never used a DVM, but would like to fix the navigation lights on my pontoon boat. Checked & replaced fuses first. That resolved the radio not working, but don't know how to procede to find a possible short in wiring to navigation lights. When I purchased the boat new 7 years ago, I didn't receive any schematics for the electrical. I'm a woman who hopes she doesn't have to pull out this boat & get overcharged by the dealer that sold it to me. Thanks for any help.
 

wifisher

Chief Petty Officer
Joined
Mar 9, 2011
Messages
578
Re: Navigation lights not workng

A test light will do all you need to troubleshoot wiring in most cases. Don't worry about a DVM yet. First thing to do is to take the cover off of the light and check for voltage with your test light. This will eliminate a bad bulb, or bad connection to the bulb at the socket. Also check the connections where the wires attach to the back of the light.

If there is no power there, go to the switch, and access the wires on the back of the switch. Use your test light to verify that power is reaching the switch, and if it is, that the power continues through the switch when it is tuned on. If the power is not getting to the switch, follow the wire back to the fuse block to check it for damage. If the power is going through the switch, follow the wire to the light and check for damage there.
 

freelancer

Petty Officer 1st Class
Joined
Jun 2, 2009
Messages
300
Re: Navigation lights not workng

I would start by checking the bulbs inside the fixture, and then check the wires connections in the fixture. Moisture often gets into the components just enough to foul things up.
 

Art Bernard

Banned
Joined
May 4, 2011
Messages
333
Re: Navigation lights not workng

Take a look at the bulb sockets, might be corrosion in them. Many times I've "fixed" dead lights by cleaning the sockets, esspecially the removable type.

Art
 

sw33ttooth

Chief Petty Officer
Joined
Apr 24, 2011
Messages
498
Re: Navigation lights not workng

Take a look at the bulb sockets, might be corrosion in them. Many times I've "fixed" dead lights by cleaning the sockets, esspecially the removable type.

Art

for your back light i believe the white plastic part will twist off [might ruin the 10 cent o ring] check the bulb and connections there i believe you have to push it in and turn then pull it out usually he back light will get corrsion and it wont work clean it up replace bulb if nessicry.

as for the front i believe those take screw drivers and pull the top off remembering which way green and red go if the lenses separate and come off, not sure how those are put in maybe its the same as the rear.

replace any o rings you pull out if there bad get new if there good clean em up reuse them.
 
Top