My first project, need a little guidance. Johnson JW-10.

bweisman12

Recruit
Thread starter
Joined
Aug 29, 2016
Messages
2
Hey all,
So I've been boating a good while now but got the itch to repair some old outboards.

A couple days ago I picked up a 52-54 Johnson 3HP JW-10.

The engine is whole. Cord pulls and retrieves nicely so nothing is seized up. I was told it was running as recently as last year.

Before pulling it apart I figured I might as well see if it starts, might get lucky. I put gas and the 2 stroke oil into the tank, pulled the cord many times, nothing. The cord pulls nicely, prop turns but no spark, no life.

What's are the first couple steps I should take for troubleshooting?

Thanks!

-Ben
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
No Title

Well one thing is for certain. If the coils have not been replaced, they need to be. ALL Johnsons that age have cracked coils unless they have already been replaced. You can take a peek by removing the recoil starter, then the thin cover plate on the flywheel.
 

Attachments

  • photo237493.jpg
    photo237493.jpg
    67.8 KB · Views: 0
Top