MUST HAVE Technical Information for DIYers.

[Don S]

MUST HAVE Technical Information for DIYers. (< An @ Work Safe Search Version Of ^^^)

If you have NEVER posted in this forum before, please click on How to ask a question link first.

1. How to Ask a Question .... Please Read This Before Posting A Question...

2. Miscellaneous Mercruiser Information

3. Volvo Penta Information

4. OMC Information

5. Engine ALIGNMENT How to's

6. HOW TO: Troubleshooting your engines starting system

7. HOW TO: Find #1 TDC on the Compression Stroke

8. HOW TO: Testing your boats fuel system.

9. HOW TO: How the Shift Interrupt system works

10. HOW TO: Summerize your Winterized boat

11. HOW TO: Winterize your engine and drive Verified
11A. HOW TO: Winterize your engine. Updated https://forums.iboats.com/threads/winterizing-inboard-and-i-o.770207/

12. Use of muffs to winterize

13. Pressure testing an outdrive

14. MerCruiser Stern Drive leaking oil (1966-current)

15. List of possible causes of low WOT (Wide Open Throttle) rpm.

16. Testing exhaust manifolds for leaks.....

17. Home Made Special Tools

18. How To: Troubleshoot a Points Ignition System

19. How To: Tune-up Your Engine with Points Ignition

20. How Points Ignition Systems Work

21. How Mercruiser Thunderbolt IV and V works.

22. Homebuilt Outdrive Stands

23. U-joint part number....

24. Water in your engine oil

25. Freeze Plugs aren't there to protect from freezing!

26. BoatInfo Manual Link

27. How to test electrical circuits


Keep Scrolling Down, there is still more

 

[Don S]

Re: MUST HAVE Technical Information for DIYers.

Re: MUST HAVE Technical Information for DIYers.

Terminology so we understand each other.

Here are the specs Don or Bond-O posted. Get a bar 24-36" long of the material you wish to use.

Here is what it looks like when completed.