motorguide 70 lb thrust digital stoped working

sboonefishing

Recruit
Thread starter
Joined
Aug 1, 2009
Messages
1
70 lb thrust 24 volt motorguide foot controle digital stoped working.Was working fine.I pluged in charger one night then next morning trolling motor didnt work.I checked all fuses & breakers and also checked voltage.All seemed to be ok.I can turn speed controle all the way down and flip on/off switch on left side of foot controle and motor will spin for half a second and then will not work at all.Normaly when speed controle is all the way down the motor wont spin at all but now it spins for half a second and nothing more.please help me !
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: motorguide 70 lb thrust digital stoped working

Not saying this caused it, but was warned by MG tech support, and it might be in the owners manual, not to leave trolling motor plugged in while charging batteries. It is that way with the Wireless series anyway. I have forgotten a couple of times but hasn't caused problems. I suspect it may happen with particular chargers that might cause an over-voltage.
 
Top