Dana Tucker
Cadet
Thread starter- Joined
- May 31, 2018
- Messages
- 8
this is a follow up to my earlier post....I put a new starter on today and tried to start the motor, it's still struggling with plugs in and now the starter won't dis-engage with or without plugs in....I can take a large socket and turn the fly wheel and the starter will dis-engage and I can turn the motor over with the socket on that big nut on top, I can feel it making compression and then it will release the pressure, am I fighting a blown motor or is there just something I can do to fix this, I removed the lower unit and the carb's because I want to change out the water pump and rebuild the carbs. I hope I'm making enough sense here that someone can picture what I'm dealing with, can't afford to take it to a shop so any help will be greatly appreciated......the motor is a 1988 40hp Evinrude