Motor stuck in forward

Cbkuehler

Recruit
Thread starter
Joined
Mar 21, 2016
Messages
2
I have a 1990 Evinrude 200 model E200stlese on a stratus 20' DC. Ever since I bought the boat the motor is cold nature but once it's starts it runs out great. Completing a tournament this past weekend I pulled up to the ramp to get the truck and once I started it to put it in the trailer the motor was in forward but my shifter is in neutral with 1500-2000 rpm (don't think my gauge is accurate) If you put in in reverse it goes forward. I'm getting the correct throttle control but it's not shifting for me. The prop is locked down so I know if I'm in gear and I have moved it back and forth trying to get it back in neutral.

I'm not familiar with how the forward/reverse works on a motor. This is my second boat. Where do I need to start looking to find my problem.

Thanks
 

Chris1956

Honorary Supreme Mariner
Joined
Mar 25, 2004
Messages
29,332
Your motor should have a shift and a throttle cable. Remove the cowling and have someone shift and throttle the motor. The shift cable should move first, forward for forward, back for reverse. After the shift cable stops moving, the throttle cable should start opening the throttle.

See if it works correctly. Shift cables do break.
 

hosteter

Petty Officer 2nd Class
Joined
Oct 29, 2015
Messages
114
Remove the shift cable in motor and try to move it with hand If it shifts.
 
Last edited:

Cbkuehler

Recruit
Thread starter
Joined
Mar 21, 2016
Messages
2
When shifted in forward it moves forward and same for reverse. But the prop is still locked down
 

James R

Commander
Joined
Feb 1, 2007
Messages
2,681
Assuming the prop does rotate. With the cable disconnected you can operate the shift lever mechanism by hand. The shift rod going down to the lower unit must move up and down. If it does not and the lever mechanism is moving back and forth the shift rod is disconnected or the crankcase is damaged. If the rod moves up and down it is either disconnected at the lower unit or the shift mechanism in the lower is damaged.
 
Last edited:
Top