Mercury 60hp 2 stroke - Trigger Reading sanity check

[Superjetjim]

Hi, just tested the trigger on my miss-firing / down on power 60HP Mercury two stroke.

These are the readings

Brown and White/ Black = 0.816k OHMS
White and White/Black = 0.536k OHMS
Violet and White/Black = 1.206k OHMS

The figures in the repair manual for my motor are on the table below (ignore that hand written ones from a different motor) - are we safe to say my trigger is toast, looking at my readings?

 

[Faztbullet]

Change the OHM setting on meter

 

[Superjetjim]

Change the OHM setting on meter

Don't believe you can, its a "smart" auto ranging meter.

 

[Superjetjim]

Change the OHM setting on meter

Brown and White/ Black = 0.816k OHMS (816 OHMS)
White and White/Black = 0.536k OHMS (536 OHMS)
Violet and White/Black = 1.206k OHMS (1,206 OHMS)